173
The IP address used by the user to access the network must be within this IP address
group.
e.
User default values for other parameters.
f.
Click
OK
.
5.
Select
Access Service
>
Service Parameters
>
Validate System Configuration
from the
navigation tree to validate the configurations.
Configuring the portal authentication server on IMC PLAT 5.0
This example assumes that the portal server runs on IMC PLAT 5.0(E0101) and IMC UAM
5.0(E0101).
1.
Configure the portal authentication server:
a.
Log in to IMC and click the
Service
tab.
b.
Select
User Access Manager
>
Portal Service Management
>
Server
from the
navigation tree to enter the portal server configuration page, as shown in
.
c.
Configure the portal server heartbeat interval and user heartbeat interval.
d.
Use the default settings for other parameters.
e.
Click
OK
.
Figure 64 Portal authentication server configuration
2.
Configure the IP address group:
a.
Select
User Access Manager
>
Portal Service Management
>
IP Group
from the
navigation tree to enter the portal IP address group configuration page.
b.
Click
Add
c.
Enter the IP group name.
d.
Enter the start IP address and end IP address of the IP group.
Make sure the host IP address is in the IP group.
e.
Select a service group.
This example uses the default group
Ungrouped
.
f.
Select
Normal
from the
Action
list.
