82
Step Command Remarks
interface view.
interface-number
3.
Set the port authorization
state.
dot1x port-control
{
authorized-force
|
auto
|
unauthorized-force
}
By default, the
auto
state
applies.
Specifying an access control method
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Layer 2 Ethernet
interface view.
interface
interface-type
interface-number
N/A
3.
Specify an access control
method.
dot1x port-method
{
macbased
|
portbased
}
By default, MAC-based access
control applies.
Setting the maximum number of concurrent
802.1X users on a port
Perform this task to prevent the system resources from being overused.
To set the maximum number of concurrent 802.1X users on a port:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Layer 2 Ethernet
interface view.
interface
interface-type
interface-number
N/A
3.
Set the maximum number of
concurrent 802.1X users on
a port.
dot1x
max-user user-number
The default setting is
4294967295.
Setting the maximum number of authentication
request attempts
The access device retransmits an authentication request if it does not receive any responses to the
request from the client within a period of time. To set the time, use the
dot1x timer tx-period
tx-period-value
command or the
dot1x timer supp-timeout
supp-timeout-value
command. The
access device stops retransmitting the request if it has made the maximum number of request
transmission attempts but still receives no response.
To set the maximum number of authentication request attempts:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the maximum number of attempts
for sending an authentication request.
dot1x retry
max-retry-value
The default setting is
2.
