175
a.
As shown in
, click the icon in the
Port Group Information Management
column
of device
NAS
to enter the port group configuration page.
b.
Click
Add
c.
Enter the port group name.
d.
Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address
group.
e.
Use the default settings for other parameters.
f.
Click
OK
.
Figure 67 Device list
Figure 68 Adding a port group
5.
Select
User Access Manager
>
Service Parameters
>
Validate System Configuration
from
the navigation tree to validate the configurations.
Configuring the switch
1.
Configure a RADIUS scheme:
# Create a RADIUS scheme named
rs1
and enter its view.
<Switch> system-view
[Switch] radius scheme rs1
# Specify the primary authentication server and primary accounting server, and configure the
keys for communication with the servers.
[Switch-radius-rs1] primary authentication 192.168.0.112
[Switch-radius-rs1] primary accounting 192.168.0.112
[Switch-radius-rs1] key authentication simple radius
[Switch-radius-rs1] key accounting simple radius
# Exclude the ISP domain name from the username sent to the RADIUS server.
