229
Step Command
Remarks
To create multiple PKI entities, repeat
this step.
3.
Set a common name for the
entity.
common-name
common-name-sting
By default, the common name is not
set.
4.
Set the country code of the
entity.
country country-code-string
By default, the country code is not set.
5.
Set the locality of the entity.
locality locality-name
By default, the locality is not set.
6.
Set the organization of the
entity.
organization org-name
By default, the organization is not set.
7.
Set the unit of the entity in
the organization.
organization-unit
org-unit-name
By default, the unit is not set.
8.
Set the state where the
entity resides.
state state-name
By default, the state is not set.
9.
Set the FQDN of the entity.
fqdn fqdn-name-string
By default, the FQDN is not set.
10.
Configure the IP address of
the entity.
ip
{
ip-address
|
interface
interface-type
interface-number
}
By default, the IP address is not
configured.
Configuring a PKI domain
A PKI domain contains enrollment information for a PKI entity. It is locally significant and is intended
only for reference by other applications like IKE and SSL.
To configure a PKI domain:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a PKI domain
and enter its view.
pki domain
domain-name
By default, no PKI domains exist.
3.
Specify the trusted
CA.
ca identifier name
By default, no trusted CA is
specified.
To obtain a CA certificate, the
trusted CA name must be
provided.
The trusted CA name uniquely
identifies the CA to be used if
multiple CAs exist on the same
CA server. The CA server's URL
is specified by using the
certificate request url
command.
4.
Specify the PKI entity
name.
certificate request entity
entity-name
By default, no entity is specified.
5.
Specify the type of
certificate request
reception authority.
certificate request from
{
ca
|
ra
}
By default, no authority type is
specified.
6.
Specify the certificate
request URL.
certificate request url url-string
[
vpn-instance vpn-instance-name
]
By default, the certificate request
URL is not specified.
Do not configure this command
when you request a certificate in
offline mode.
