171
Figure 59 Portal authentication server configuration
2.
Configure the IP address group:
a.
Select
Access Service
>
Portal Service Management
>
IP Group
from the navigation
tree to enter the portal IP address group configuration page.
b.
Click
Add
c.
Enter the IP group name.
d.
Enter the start IP address and end IP address of the IP group.
Make sure the host IP address (2.2.2.2) is in the IP group.
e.
Select a service group.
This example uses the default group
Ungrouped
.
f.
Select
Normal
from the
Action
list.
g.
Click
OK
.
Figure 60 Adding an IP address group
3.
Add a portal device:
a.
Select
Access Service
>
Portal Service Management
>
Device
from the navigation tree
to enter the portal device configuration page.
b.
Click
Add
c.
Enter the device name
NAS
.
d.
Enter the IP address of the switch's interface connected to the host.
e.
Enter the key, which must be the same as that configured on the switch.
f.
Set whether to enable IP address reallocation.
This example uses direct portal authentication. Therefore, select
No
from the
Reallocate IP
list.
