447
Configuring parameters for a user profile
Configurations in user profile view take effect only after the device applies the user profile to the user.
Configuring QoS parameters for traffic management
To configure QoS parameters:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enter user profile view.
user-profile
profile-name
N/A
3.
Apply a QoS policy
qos apply policy policy-name
{
inbound
|
outbound
}
The QoS policy must already
exist.
For information about QoS policy
configuration, see
ACL and QoS
Configuration Guide
.
For information about the
commands, see
ACL and QoS
Command Reference
.
Displaying and maintaining user profiles
Execute
display
commands in any view.
Task Command
Display configuration and online user information
for the specified user profile or all user profiles.
display user-profile
[
name profile-name
]
[
slot
slot-number
]
User profile configuration examples
Local 802.1X authentication/authorization with QoS policy
configuration example
Network requirements
As shown in
, the access switch performs local 802.1X authentication and authorization
for User A, User B, and User C.
Configure user profiles for the users and apply a QoS policy to each user to implement the following
functions:
•
Deny User A's access to the network from 8:30 to 12:00 daily.
•
Limit the outgoing traffic rate to 2000 kbps for User B.
•
Limit the incoming traffic rate to 4000 kbps for User C.
