174
g.
Click
OK
.
Figure 65 Adding an IP address group
3.
Add a portal device:
a.
Select
User Access Manager
>
Portal Service Management
>
Device
from the
navigation tree to enter the portal device configuration page.
b.
Click
Add
c.
Enter the device name
NAS
.
d.
Enter the IP address of the switch's interface connected to the host.
e.
Enter the key, which must be the same as that configured on the switch.
f.
Set whether to enable IP address reallocation.
This example uses direct portal authentication. Therefore, select
No
from the
Reallocate IP
list.
g.
Select whether to support sever heartbeat and user heartbeat functions.
In this example, select
Yes
for both
Support Server Heartbeat
and
Support User
Heartbeat
.
h.
Click
OK
.
Figure 66 Adding a portal device
4.
Associate the portal device with the IP address group:
