To establish a power-on password through the Computer (F10) menu:
1.
Power on or restart the workstation.
2.
As soon as your workstation is powered on, press and hold the
F10
key until you enter the Computer
Setup (F10) Utility. Press
Enter
to bypass the title screen, if necessary.
NOTE:
If you do not press the
F10
key at the appropriate time, you must restart the workstation,
and then press and hold the
F10
key again to access the utility.
If you are using a PS 2 keyboard, you might see a keyboard error message—disregard it.
3.
Select
Security>Power-On Password
, and then follow the onscreen instructions.
4.
Before exiting, select
File>Save Changes,
and then
Exit
.
Entering a power-on password
1.
Restart the workstation.
2.
When the key icon appears on the monitor, enter the current password, and then press
Enter
.
NOTE:
Type carefully. For security reasons, the characters you enter do not appear on the screen.
If you enter the password incorrectly, a broken key icon appears. Try again. After three unsuccessful
tries, you must restart the workstation before you can continue.
Entering a Setup Password
If a setup password has been established on the workstation, you will be prompted to enter it each time
you run the Computer Setup (F10) Utility.
To enter a setup password:
1.
Restart the workstation.
2.
As soon as the workstation is powered on, press and hold the
F10
key until you enter the Computer
Setup (F10) Utility. Press
Enter
to bypass the title screen, if necessary.
NOTE:
If you do not press the
F10
key at the appropriate time, you must restart the workstation
and press and hold the
F10
key again to access the utility.
If you are using a PS 2 keyboard, you might see a keyboard error message—disregard it.
3.
When the key icon appears on the monitor, enter the setup password, and press
Enter
.
NOTE:
Type carefully. For security reasons, the characters you enter do not appear on the screen.
If you enter the password incorrectly, a broken key icon appears. Try again. After three unsuccessful
tries, you must restart the workstation before you can continue.
Changing a power-on or setup password
1.
Restart the workstation.
2.
To change the power-on password, go to step 4.
3.
To change the setup password, as soon as the workstation is powered on, press and hold the
F10
key until you enter the Computer Setup (F10) Utility. Press
Enter
to bypass the title screen, if
necessary.
ENWW
Workstation management
43
Содержание Xw4600 - Workstation - 2 GB RAM
Страница 1: ...HP xw4600 Workstation Service and Technical Reference Guide ...
Страница 10: ...x ENWW ...
