2.
Raise the processor socket lever (1) and open the cover (2).
Figure 5-61
Removing the system processor
CAUTION:
The processor socket contacts are delicate. To avoid bending the contacts, use
extreme care when handling the processor.
3.
Pull the processor straight out of the socket (3).
CAUTION:
Do not touch the processor socket pins or the gold pads underneath the processor.
Handle the processor by the edges.
NOTE:
Store the processor in a static free container in a safe place where it cannot be damaged.
Installing a system processor
1.
Disconnect power from the system (
Predisassembly procedures on page 57
), remove the side
access panel (
Removing the side access panel on page 61
), remove the processor heatsink
(
Removing the processor heatsink on page 101
), and then remove the processor (
Removing a
system processor on page 103
).
2.
Raise the processor socket lever and cover fully.
CAUTION:
The processor socket contacts are delicate. To avoid bending the contacts, use
extreme care when installing the processor in the socket.
104 Chapter 5 Removal and replacement procedures
ENWW
Содержание Xw4600 - Workstation - 2 GB RAM
Страница 1: ...HP xw4600 Workstation Service and Technical Reference Guide ...
Страница 10: ...x ENWW ...
