Copying a setup configuration to a single workstation
CAUTION:
A setup configuration is model-specific. File system corruption can result if source and
target workstations are not the same model. For example, do not copy the setup configuration from an
HP xw4200 Workstation to an HP xw4600 Workstation.
1.
Select a setup configuration to copy, and then reboot the workstation.
2.
As soon as the workstation powers on, press and hold the
F10
key until you enter the Computer
Setup (F10) Utility. If necessary, press
Enter
to bypass the title screen.
NOTE:
If you do not press the
F10
key at the appropriate time, you must restart the workstation,
and then press and hold the
F10
key again to access the utility.
If you are using a PS 2 keyboard, you may see a keyboard error message—disregard it.
3.
If you are using a diskette or other storage device, insert it now. If not, proceed to the next step.
4.
Select
File>Replicated Setup>Save to Removable Media
. Follow the instructions on the screen
to create the configuration diskette.
5.
Power off the workstation you are configuring and insert the configuration diskette into the diskette
drive.
6.
Power on the workstation you are configuring.
7.
Press and hold the
F10
key until you enter the Computer Setup (F10) Utility. If necessary, press
Enter
to bypass the title screen.
8.
Select
File>Replicated Setup>Restore from Removable Media
, and then follow the instructions
on the screen.
9.
Restart the workstation when the configuration is complete.
ENWW
Workstation management
35
Содержание Xw4600 - Workstation - 2 GB RAM
Страница 1: ...HP xw4600 Workstation Service and Technical Reference Guide ...
Страница 10: ...x ENWW ...
