HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 78

Страница: 78 / 358

Select the

Automigration/Replication

tab.

Expand

Destination Libraries

in the navigation pane.

Select the library of interest to open the

Destination Library Details

screen.

From the task bar, select

Re-manage LAN/WAN Replication Target

Enter the host name of the LAN/WAN replication target

only if

the LAN/WAN replication target's

host name has changed.

Enter the LAN/WAN replication target password.

Select

Submit

The LAN/WAN replication target is now re-managed with the source using the new password.

You can now create pools for the library and manage your data on the library using replication.

You can also unmanage the library at any time. See
“

Unmanaging a SAN or LAN/WAN Library

” on page 78 for instructions.

Unmanaging a SAN or LAN/WAN Library

Use one of the following two ways to unmanage a library:

Unmanage a library from the

Destination Library Details

window.

From the navigation pane, select the specific library to unmanage.

NOTE:

You can only select one library to unmanage at a time. To unmanage additional libraries,
repeat the procedure for each library to unmanage.

Select

Unmanage

from the task bar.

Select

from the dialog box.

The

Destination Libraries

window displays and provides the message, “The library, [library name],

was unmanaged successfully.”

Unmanage the library from the

Destination Libraries

window.

Select

Destination Libraries

from the navigation pane.

From the task bar, select

Unmanage Library

The

Unmanage Destination Library

screen displays, showing all managed libraries. If there are

no managed libraries, the system will return the message: “There are no managed libraries”.

If the library you wish to unmanage is not already selected, select it now.

NOTE:

You can only select one library to unmanage at a time. To unmanage additional libraries,
repeat the procedure for each library to unmanage.

Automigration/Replication

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Результаты поиска

Содержание StorageWorks 6000 - Virtual Library System

Отзывы:

Бренды по названию

Популярные бренды

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Результаты поиска

Содержание StorageWorks 6000 - Virtual Library System

Отзывы:

Бренды по названию

Популярные бренды