manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 245

Status

9 Fault LED (am-
ber)

8 Power LED
(green)

No power to this specific power supply
-Or-
Power supply failure

On

Off

AC power present
System in standby mode

Off

Blinking

Power supply on and working properly

Off

On

Power supply current limit exceeded

Blinking

On

Table 13 Hard drive LED combinations

Status

Fault LED

Online LED

Activity LED

Do not remove the drive. Removing a drive during this pro-
cess causes data loss.
The drive is being accessed and is not configured as part
of an array.

Off

Off

On

Do not remove the drive. Removing a drive during this pro-
cess causes data loss.
The drive is rebuilding or undergoing capacity expansion.

Off

Flashing

On

Do not remove the drive. Removing a drive during this pro-
cess causes data loss.
The drive is part of an array being selected by the Array
Configuration Utility.
-Or-
The Options ROMPaq is upgrading the drive.

Flashing

Flashing

Flashing

OK to replace the drive online if a predictive failure alert is
received, and the drive is attached to an RAID controller.
The drive is not configured as part of an array.
-Or-
If this drive is part of an array, then a powered-on controller
is not accessing the drive
.-Or-
The drive is configured as an online spare.

Off

Off

Off

OK to replace the drive online.
The drive has failed and has been placed off-line.

On

Off

Off

OK to replace the drive online if a predictive failure alert is
received (refer to the following section for details), provided
that the array is configured for fault tolerance and all other
drives in the array are online.
The drive is online and configured as part of an array.

Off

On

Off

HP StorageWorks

245

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды