manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 253

Front Panel LEDs

Status

Description

Item

Blue = The unit identification button on the rear of the disk array has been
pressed.
Amber = The drive has failed or is predicted to fail in the near future.

Hard drive fault/ID
bicolor LED

1

Green = The drive is online.
Off = The drive is offline or the disk array is powered down.

Hard drive online
LED

2

For more information about the meaning of the various hard drive LED illumination patterns, see

Hard

drive LED combinations

.

Table 14 Hard Drive LED Combinations

Status

Fault/ID LED (am-
ber/blue)

Online LED (green)

The drive has failed, or a predictive failure alert has been received
for this drive. It has also been selected by the VLS management
application.

Alternating between
amber and blue

On, off, or flashing

The drive is operating normally, and it has been selected by the
VLS management application.

Steadily blue

On, off, or flashing

A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.

Amber, flashing
regularly (1 Hz)

On

The drive is online, but it is not currently active.

Off

On

A predictive failure alert has been received for this drive. To
minimize the risk of data loss, replace the drive.

Amber, flashing
regularly (1 Hz)

Flashing regularly
(1 Hz)

The drive is rebuilding.

Off

Flashing regularly
(1 Hz)

The drive is active, but a predictive failure alert has been received
for this drive. Replace the drive as soon as possible.

Amber, flashing
regularly (1 Hz)

Flashing irregularly

The drive is active, and it is operating normally.

Off

Flashing irregularly

A critical fault condition has been identified for this drive, and
the controller has placed it offline. Replace the drive as soon as
possible.

Steadily amber

Off

A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.

Amber, flashing
regularly (1 Hz)

Off

HP StorageWorks

253

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды