manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 221

Status

Description

Item

•

Green = Auxiliary power is applied.

•

Off = Auxiliary power is not applied.

Standby power good

11

•

Amber = One fan in this module has failed.

•

Red = Multiple fans in this module have
failed.

•

Off = All fans in this module are operating
normally.

Power supply fan module failure

12

Refer to the 

HP Remote Lights-Out Edition II User

Guide

.

System diagnostic

13

•

Amber = Failover has occurred. Online spare
memory is in use.

•

Green = Online spare memory is enabled,
but not in use.

•

Off = Online spare memory is disabled.

Online spare memory

14

•

Amber = PCI riser assembly is not seated.

•

Off = PCI riser assembly is seated.

Riser interlock

15

Node LEDs and Internal Health LED Combinations

When the internal health LED on the front panel of the node illuminates either amber or red, the node
is experiencing a health event. Combinations of illuminated system board LEDs and the internal health
LED indicate node status.

Status

Internal Health
LED Color

System board LED
and color

One or more of the following conditions may exist:

•

Processor in socket X has failed.

•

Processor in socket X failed over to the offline spare.

•

Processor X is not installed in the socket.

•

Processor X is unsupported.

•

ROM detects a failed processor during POST.

Red

Processor failure,
socket X (Amber)

Processor in socket X is in a pre-failure condition.

Amber

Processor types are mismatched.

Red

Processor failure,
both sockets (Am-
ber)

PPM has failed.

Red

PPM failure (Amber)

•

DIMM in slot X has failed.

•

DIMM in slot X is an unsupported type, and no valid memory
exists in another bank.

Red

DIMM failure, slot X
(Amber)

HP StorageWorks

221

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды