manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 294

CAUTION:

Use only Compaq branded or HP DIMMs. DIMMs from other sources may adversely affect data
integrity.

To replace the component, reverse the removal procedure.

NOTE:

DIMMs do not seat fully if turned the wrong way.
When replacing a DIMM, align the DIMM with the slot and insert the DIMM firmly, pressing down
until the DIMM snaps into place. When fully seated, the DIMM slot latches lock into place.

NOTE:

Be sure all DIMM retention clips are in the closed/locked position before re-installing the processor
memory board into the node.

Processor

CAUTION:

To prevent possible node malfunction and damage to the equipment, replace the processors with the
same make and type of processor.

CAUTION:

If reusing the heatsink, clean and apply thermal grease to prevent thermal failure. The syringe in this
kit contains 1.0 gm (0.5 ml) or 0.5 gm (0.25 ml) of grease designed for use as a thermal interface
between the processor and the heatsink.

1.

Remove the processor memory board. See

Processor Memory Board

.

Component Replacement

294

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды