manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 230

Status

Internal health
LED color

HP Systems In-
sight Display LED
and color

One or more of the following conditions may exist:

•

Processor in socket X has failed.

•

Processor X is required yet not installed in the socket.

•

Processor X is unsupported.

•

ROM detects a failed processor during POST.

Red

Processor failure,
socket X (amber)

Processor in socket X is in a pre-failure condition.

Amber

One or more of the following conditions may exist:

•

PPM in slot X has failed.

•

PPM is not installed in slot X, but the corresponding processor
is installed.

Red

PPM failure, slot X
(amber)

FBDIMM in slot X has failed.

Red

FBDIMM failure, slot
X (amber)

FBDIMM in slot X is in a pre-failure condition.

Amber

One or more FBDIMMs has failed. Test each bank of FBDIMMs
by removing all other FBDIMMs. Isolate the failed FBDIMM by
replacing each FBDIMM in a bank with a known working FB-
DIMM.

Red

FBDIMM failure, all
slots in one bank
(amber)

Bank X failed over to the online spare memory bank.

Amber

Online spare
memory (amber)

Invalid online spare memory configuration.

Red

Online spare
memory (flashing
amber)

Online spare memory enabled and not failed.

Green

Online spare
memory (green)

Bank X failed over to the mirrored memory bank.

Amber

Mirrored memory
(amber)

Invalid mirrored memory configuration.

Red

Mirrored memory
(flashing amber)

Mirrored memory enabled and not failed.

Green

Mirrored memory
(green)

The Health Driver has detected a cautionary temperature level.

Amber

Overtemperature
(amber)

The server has detected a hardware critical temperature level.

Red

PCI riser cage is not seated.

Red

Riser interlock (am-
ber)

One fan is failed or removed.

Amber

Fan module (amber)

Two or more fans have failed or are removed.

Red

Component Identification

230

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды