manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 210

Usage 

1

Command

Returns information about the storage pool, such as primary LUN name, allocated
capacity, capacity, extent size, used capacity, and number of LUNs. Where the
options are:

-a <s>

- Storage pool name (StoragePool_#) (optional)

-h

- Displays command usage information (optional)

getStoragePool

Returns summary of storage pool information for all storage pools on the VLS.

getStoragePoolSum-

mary

Adds the specified host in the SAN list.

addHost

Lists the current host state for all hosts in the SAN list.

listHostState

Sets the host state for specified host.

setHostState

Sets the host state for all hosts in the SAN list to the state specified.

setHostStateAll

Lists the current host access mode for all enabled hosts in the system.

listAccessMode

Sets the host access mode for all enabled hosts in the system.

setAccessMode

Sets the alias for the hostname of the specified host.

setAlias

Deletes the specified host from the SAN list.

removeHost

Adds the specified device to the host.

addLunMap

Lists the host LUN map for specified device.

listLunMap

Deletes the specified device from the host.

deleteLunMap

Returns the compatibility mode for the virtual serial numbers.

getTapeSerialCompat-

ibilityMode

Sets the compatibility mode for the virtual serial numbers. Upgrading to VLS firm-
ware version 3.3.0 cause the colons in serial numbers to change to periods.

-m <s>

- Compatibility mode

•

Standard

 = default, keeps change of using periods instead of colons

•

Legacy

 = changes periods to back to colons

setTapeSerialCompat-

ibilityMode

Returns the firmware version compatibility mode for the WWNNs.

getWwnnCompatibil-

ityMode

Sets the firmware version compatibility mode for the WWNNs. Upgrading to VLS
firmware version 3.3.0 causes the WWNNs for the VLS host ports to change to
begin with 20 instead of 50.

-m <s>

- Compatibility mode

•

3.2.X

 = default, keeps change of using 20 instead of 50

•

3.1.X

 = changes 20 back to 50 (use if you just upgraded from version 3.1.x

or version 3.2.x with the hp_3.2.2_reboot_101.zip patch installed)

•

2.X

 = changes 20 back to 50 (use if you just upgraded from version 2.x and

you have UNIX servers connected to the VLS over the SAN)

setWwnnCompatibil-

ityMode

1

<s> = string; <n> = number; <f> = filename

CLI Command Set

210

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды