manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 241

Hard Drive LED Combinations

Interpretation

Fault/UID LED
(amber/blue)

Online/activity
LED (green)

The drive has failed, or a predictive failure alert has been received
for this drive; it also has been selected by a management applic-
ation.

Alternating amber
and blue

On, off, or flashing

The drive is operating normally, and it has been selected by a
management application.

Steadily blue

On, off, or flashing

A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.

Amber, flashing
regularly (1 Hz)

On

The drive is online, but it is not active currently.

Off

On

Do not remove the drive. Removing a drive may terminate the
current operation and cause data loss.

The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has
been received for this drive. To minimize the risk of data loss, do
not replace the drive until the expansion or migration is complete.

Amber, flashing
regularly (1 Hz)

Flashing regularly
(1 Hz)

Do not remove the drive. Removing a drive may terminate the
current operation and cause data loss.

The drive is rebuilding, or it is part of an array that is undergoing
capacity expansion or stripe migration.

Off

Flashing regularly
(1 Hz)

The drive is active, but a predictive failure alert has been received
for this drive. Replace the drive as soon as possible.

Amber, flashing
regularly (1 Hz)

Flashing irregularly

The drive is active, and it is operating normally.

Off

Flashing irregularly

A critical fault condition has been identified for this drive, and
the controller has placed it offline. Replace the drive as soon as
possible.

Steadily amber

Off

A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.

Amber, flashing
regularly (1 Hz)

Off

The drive is offline, a spare, or not configured as part of an array.

Off

Off

HP StorageWorks

241

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды