manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, Руководство пользователя

Поделиться
Скачать
HP StorageWorks 6000 - Virtual Library System Скачать руководство пользователя страница 307

WARNING!

 These symbols, which mark an RJ-45 receptacle, indicate a network interface connection.

WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into this receptacle.

WARNING!

 These symbols, which mark a surface or area of the equipment, indicate the presence of

a hot surface or hot component. Contact with this surface could result in injury.
WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before
touching.

WARNING!

 Power supplies or systems marked with these symbols indicate the presence of multiple

sources of power.
WARNING: To reduce the risk of personal injury from electrical shock, remove all power cords to
completely disconnect power from the power supplies and systems.

WARNING!

 Any product or assembly marked with these symbols indicates that the component exceeds

the recommended weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment, observe local
occupational health and safety requirements and guidelines for manually handling material.

Rack Stability

Rack stability protects personnel and equipment.

HP StorageWorks

307

Содержание StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды