HP OMNIBOOK 5700 Скачать руководство пользователя страница 83

Страница: 83 / 159

Using Windows NT 4.0

Installing Windows NT 4.0

5-3

Installing Windows NT 4.0

This section describes how to set up the operating system and drivers including:

♦

Disabling the infrared port.

♦

Installing Windows NT 4.0.

♦

Installing video support.

♦

Installing sound support.

♦

Installing mobile enhancements.

♦

Installing CardWizard and PowerProfiler.

To disable infrared

Windows NT 3.51 does not support infrared communications. Disable the infrared
port on the OmniBook to free COM2 for your modem.

1. Restart the OmniBook.

2. Press F2 when prompted to enter the System Configuration Utility (SCU).

3. Choose COM Ports from the Input/Output menu.

4. Change the IR port to None.

5. Save and Exit the SCU.

To install Windows NT 4.0

This installation assumes an internal CD-ROM and a previously completed standard
HP Windows 95 or Windows for Workgroups installation.

1. Press the Off button on the left side of the OmniBook.

2. Insert the CD-ROM drive.

3. Connect the OmniBook floppy disk drive to the parallel port.

4. Insert the Windows NT 4.0 Setup Boot Disk into the floppy disk drive.

Содержание OMNIBOOK 5700
































































































































































Результаты поиска

Содержание OMNIBOOK 5700

Отзывы:

Похожие инструкции для OMNIBOOK 5700

Бренды по названию

Популярные бренды

HP OMNIBOOK 5700, Руководство оценщика

Результаты поиска

Содержание OMNIBOOK 5700

Отзывы:

Похожие инструкции для OMNIBOOK 5700

Бренды по названию

Популярные бренды