manualshive.com logo in svg

HP OMNIBOOK 5700, Руководство оценщика

Поделиться
Скачать
HP OMNIBOOK 5700 Скачать руководство пользователя страница 51

Using Windows 95

Installing Windows 95

3-7

To install sound support

Requirements

♦ 

OmniBook 2000/5700 with Windows 95 installed.

♦ 

OmniBook 2000/5700 driver for sound support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\SOUND.

 1. From Control Panel, double-click Systems.

 2. Click Device Manager.

 3. Remove all devices under Other Devices, then click Close.

 The joystick and audio hardware removal may cause the OmniBook to display

a blue screen with a message: Windows Fatal Exception. If this occurs, press
Ctrl+Alt+Del to restart the OmniBook. Then repeat steps 1-3. The error will be
corrected during the next hardware detection.

 4. Shut down Windows 95.

 5. Reset the OmniBook by pressing the Off button on the left side of the computer,

then pressing the blue On/Suspend button.

Important

You 

must

 reset the OmniBook in order to successfully complete the Sound

installation.

 Windows 95 recognizes the Sound Controller and prompts you for the drivers.

 6. Select Driver From Disk Provided By Hardware Manufacturer, then click OK.

 7. Enter the sound drivers directory, then click OK.

 8. If prompted, insert the Windows 95 Installation CD and change the directory to

D:\WIN95, then click OK.

Содержание OMNIBOOK 5700
































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды