HP OMNIBOOK 5700 Скачать руководство пользователя страница 112

Страница: 112 / 159

Using OS/2 Warp 4.0

Installing Cards

6-14

13. Insert the 3Com Drivers Disk, then click OK to accept A:\.

14. Click OK to accept 3Com EtherLink III LAN+MODEM PC card FOR OS/2 V1.5

and Ethernet.

15. Remove the floppy disk, then click OK when prompted.

16. Click Install.

17. Click OK to begin the installation.

18. If the OS/2 Warp Tuning Assistant changed your NetBIOS parameters, click OK.

19. Click OK to shut down OS/2.

20. Press Ctrl+Alt+Del to reboot.

To install an Intel EtherExpress PRO/100B PCI LAN
adapter

Requirements

♦

OmniBook 2000/5700 with OS/2 Warp 4.0 installed.

♦

Intel EtherExpress PRO/100B PCI LAN adapter.

♦

OS/2 Warp 4.0 CD-ROM.

♦

Intel drivers disk.

♦

Live LAN connection.

This procedure assumes that OS/2 Warp networking has not yet been installed

1. Insert the Intel PCI card into the OmniBook’s Docking System.

Refer to the OmniBook Docking System

User’s Guide

for more information.

2. Turn off and then dock the OmniBook.

3. Insert the CD-ROM drive, connect the floppy drive to the parallel port.

4. Start the OmniBook.

5. Open the OS/2 System folder, then the System Setup folder.

6. Open the Install/Remove folder.

7. Double-click on Selective Install for Networking.

Содержание OMNIBOOK 5700
































































































































































Результаты поиска

Содержание OMNIBOOK 5700

Отзывы:

Бренды по названию

Популярные бренды

HP OMNIBOOK 5700, Руководство оценщика

Результаты поиска

Содержание OMNIBOOK 5700

Отзывы:

Бренды по названию

Популярные бренды