HP OmniBook 3100 Скачать руководство пользователя | Manualshive

Страница: 32 / 107

background image

HP OmniBook 2100/3000/3100

Removal and Replacement

2-9

Replacing Small Parts

(User-Replaceable)

The following small parts are user-replaceable.

Table 2-6. Replacing Small Parts (User-Replaceable)

Part

Replacement Procedure

Cover, BIOS

On the bottom of the unit, insert a small flat-blade screwdriver into the slot at the
edge of the BIOS cover and pry it off.

Cover, Hinge

With the display fully open, slide off the hinge cover about 5 mm, then lift it off. Use
your finger or a small tool to push outward next to the hinge.
To reinstall the cover, slide the open end of the cover onto the hinge, then lift the
closed end over the bump and slide it in.

Cover, Icon Window

1. Remove the floppy drive or other plug-in module.
2. With the display fully open, slide off each hinge cover about 5 mm, then lift it

off. Use your finger or a small tool to push outward next to the hinge.

3. Pry out and pop up the right end of the icon window cover at the plug-in

module slot, then pop off the cover.

Cover, RAM

Remove the hard drive (see page 2-5). Slide the RAM cover about 3 mm toward the
hard drive opening, then lift off the cover.

Door, I/O
(and Hinge)

Open the door and unsnap it from the center hinge. Flex the center of the door until
one of the side tabs releases.
To replace the center I/O door hinge, insert a small flat-blade screwdriver behind
the flat plate and pop the hinge out of the case. When installing the center hinge,
make sure the hinge support curves downward.

Feet

Insert a small flat-blade screwdriver under the end of the foot and pry it loose. To
replace, firmly press the adhesive side of the foot into the recess.

Removing the Display Assembly

(HP Authorized Service Providers Only)

Required Equipment

•

Small Phillips screwdriver, preferably magnetized.

Removal Procedure

1. Unplug the ac adapter, if present, and remove the battery.

2. Remove the floppy drive or other plug-in module (see page 2-4).

3. Open the display fully.

4. Slide off the two plastic hinge covers about 5 mm, then lift them off. Use your finger or a small

tool to push outward next to the hinge.

Note

If a hinge cover has no metal clip on the bottom, replace the cover with a new one. (Service notes
3000-05, 2100-02, 3100-02.)

«
...
30
31
32
33
34
...
»

Содержание OmniBook 3100












































































































Отзывы:

Нет отзывов

Похожие инструкции для OmniBook 3100

Бренд: DBM Страницы: 50

Бренд: VAF instruments Страницы: 56

INTERNET PRIVACY PROTECTION

Бренд: AlphaShield Страницы: 49

Бренд: ETAS Страницы: 69

Бренд: Analog Devices Страницы: 76

Brocade X6-8 Director

Бренд: Broadcom Страницы: 207

X-Pedition 2000

Бренд: Enterasys Страницы: 86

Бренд: Xilica Audio Design Страницы: 30

IAR KickStart Kit TWR-K60N512-IAR

Бренд: IAR SYSTEMS Страницы: 8

Бренд: EMCIS Страницы: 14

Бренд: Z-Wave Страницы: 6

Бренд: Digi Страницы: 116

Бренд: Cypress Semiconductor Страницы: 26

Бренд: Roland Страницы: 224

EK-UNI Holder D5 V3

Бренд: ekwb Страницы: 2

Бренд: TERSUS Страницы: 7

Analog Pulse Generator 812-OP/H

Бренд: Link electronics Страницы: 2

Бренд: Omnia Страницы: 130

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды