HP OmniBook 3100 Скачать руководство пользователя | Manualshive

Страница: 41 / 107

background image

2-18

Removal and Replacement

HP OmniBook 2100/3000/3100

Removing a 13" Display Case or Display Bracket

(HP Authorized Service Providers Only)

Required Equipment

•

Small Phillips screwdriver, preferably magnetized.

•

Pointed knife or probe.

•

Three small flat-blade screwdrivers (or equivalent tools for prying).

Removal Procedure

1. Unplug the ac adapter, if present, and remove the battery.

2. Remove these additional assemblies:

•

Floppy drive or other plug-in module (see page 2-4).

•

Display assembly (see page 2-9).

•

LCD module (see page 2-12).

3. Remove the four screws holding the hinges and remove the hinges.

4. Remove the screw holding the display bracket to the display case near the hinge area.

5. If the EPE foam does not stick to the display case, remove the foam. If it does stick, you can leave

it in place.

Important

In the next steps, you

must

start at the left side of the display case. Otherwise, the display bracket

will not be able to tip up out of the display case.

Also, we suggest that you disengage all three tabs along the left edge at the same time. It is
difficult to disengage them one at a time.

6. Using two or three small flat-blade screwdrivers or equivalent, separate the left side of the display

case from the display bracket to disengage the three tabs.

7. Pry up the left side of the display bracket. There will be some friction due to the snug fit at the

corners. You can use a small flat-blade screwdriver to pry at the corners between the metal screw
tabs and the plastic posts underneath. (If the EPE foam sticks to the display case, fold it out of the
way as the bracket lifts out of the display case.)

8. After the bracket clears the case, slide the bracket toward the left until it is freed from the right

side of the case. Lift out the bracket and LCD flex cable.

9. To replace the display case, unsnap the inverter PCA from the case and remove it with the

inverter/MB cable. You have to remove a piece of Kapton tape to do this.

To replace the LCD bracket, remove the screw holding the LCD flex cable.

«
...
39
40
41
42
43
...
»

Содержание OmniBook 3100












































































































Отзывы:

Нет отзывов

Похожие инструкции для OmniBook 3100

Бренд: Klark Teknik Страницы: 50

Бренд: Genie Страницы: 15

Бренд: Advantech Страницы: 50

Бренд: NKE Страницы: 15

Compact NVR-AS 4000

Бренд: IndigoVision Страницы: 38

Бренд: Baikal Miner Страницы: 14

Бренд: Kentrox Страницы: 246

Бренд: RR-Concepts Страницы: 12

Бренд: Omron Страницы: 14

Xtreme Networked Boat

Бренд: Broadband Products Страницы: 16

Бренд: Patton electronics Страницы: 8

Бренд: XMOS Страницы: 8

Бренд: Rosewill Страницы: 5

Suppression Inductors LFZ24H

Бренд: Delta Electronics Страницы: 1

Бренд: Barco Страницы: 538

Бренд: INGENIA Страницы: 58

Бренд: OPTO 22 Страницы: 28

CCR2004-16G-2S+PC

Бренд: MikroTik Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды