manualshive.com logo in svg

HP OmniBook 3100, Руководство по обслуживанию, Страница: 45 / 107

Поделиться
Скачать
HP OmniBook 3100 Скачать руководство пользователя страница 45

2-22

Removal and Replacement

HP OmniBook 2100/3000/3100

  2.  Remove these additional assemblies:

 • 

Floppy drive or other plug-in module (see page 2-4).

 • 

Hard drive (see page 2-5).

 • 

Display assembly (see page 2-9).

 • 

Keyboard (see page 2-20).

  3.  Remove the heatsink by doing the following:

 • 

Remove the three recessed screws from the heatsink.
Note: Do not remove the two middle screws from the heatsink. They hold a permanent part of
the assembly.

 • 

Lift the front edge of the heatsink slightly and slide it toward the front of the computer until
the four tabs along the back edge are free from the case.

 • 

Lift the right end of the heatsink and unplug the fan cable from the motherboard.

 

 

 

Figure 2-17. Removing the Heatsink

Screw, M2×5mm
Note: Smaller diameter

Heatsink (includes fan/cable),
depends on the CPU type

Fan cable
connector

Speaker/TouchPad
cable

CPU Thermal Kit (pad and spacer),
depends on the CPU type

Do not remove
these two screws.

Содержание OmniBook 3100












































































































Отзывы:

Нет отзывов