HP Integrity Superdome 2 Скачать руководство пользователя страница 170

Страница: 170 / 191

613 This partition operation is not supported.

614 Partition is busy at this time.

615 Blade(s) already assigned to another partition

616 Error assigning blade(s) to the partition.

617 Error unassigning blade(s) from the partition.

618 Error setting blade attributes.

619 A blade in the partition cannot be activated.

620 IO Bay(s) already assigned to another partition.

621 Error assigning IO Bays to the partition.

622 Error unassigning IO Bays from the partition.

623 Error setting IO Bay attributes.

624 Partition creation already in progress.

625 Partition modification already in progress.

626 Partition removal already in progress

705 A vPar with that name or number already exists.

706 The specified vPar does not exist.

707 Specified vPar is already active.

708 Specified vPar is not now active.

709 The vPar database does not exist.

710 The specified nPartition does not exist.

711 The specified nPartition is not active

712 No specification exists for this vPar.

713 Exceeded user-defined maximum number of vPars for this nPartition.

714 Exceeded number of vPars supported by a single blade.

715 Exceeded number of vPars supported in this complex.

716 Unable to assign a resource to this vPar.

717 Insufficient available resources to create the vPar.

718 Invalid input for creating a vPar.

719 Timeout occurred during vPar operation. Please refer to the system log for additional details.

720 vPar operation failed. Please refer to the system log for additional details.

721 A Boot Service Processor is not assigned to this vPar.

722 The maximum number of vpars has been already been defined.

723 The vPar database already exists.

805 Specified blade or IO Bay is already part of this partition.

806 Specified blade or IO bay is not present.

807 Specified blade or IO Bay is already assigned to another partition.

808 The specified blade or IO Bay could not be assigned to the partition.

809 The specified blade or IO Bay cannot be assigned to the partition.

810 The specified blade or IO Bay is already active.

811 The specified blade or IO Bay is not active.

812 There is already a pending action for this resource.

813 Specified blade or IO Bay is not a member of this partition.

170

Troubleshooting

Содержание Integrity Superdome 2
































































































































































































Результаты поиска

Содержание Integrity Superdome 2

Отзывы:

Похожие инструкции для Integrity Superdome 2

Бренды по названию

Популярные бренды

HP Integrity Superdome 2, Руководство пользователя

Результаты поиска

Содержание Integrity Superdome 2

Отзывы:

Похожие инструкции для Integrity Superdome 2

Бренды по названию

Популярные бренды