HP Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB Скачать руководство пользователя страница 166

Страница: 166 / 192

Troubleshooting

14–2

NOTE:

For troubleshooting information on Microsoft Operating System

applications, go to

www.microsoft.com/mobile

You can use the following suggestions to troubleshoot problems with your

HP iPAQ.

Problem Solution

I cannot see

anything on the

screen.

•

Be sure the HP iPAQ is powered on.

•

Be sure the HP iPAQ battery is charged.

•

Be sure the HP iPAQ is connected to the AC Adapter and the

HP iPAQ Cradle.

•

Reset the device by using the stylus to lightly press the

Reset

button.

•

Remove and replace the battery.

I cannot keep my

battery charged.

•

Always keep the HP iPAQ connected to the AC Adapter when you

are not using it.

•

Tap

Start

Settings > System

tab

> Backlight

icon. In

backlight settings, place a checkmark in the check box next to

Turn off backlight if device is not used for

and select

seconds

to conserve more battery power.

•

Tap

Start

Settings > System

tab

Power > Advanced

tab. In battery power settings, set the battery power

To turn off

device if not used for 2 minutes.

•

Turn off the Phone, Bluetooth, and all wireless connections when

not in use.

•

Check to make sure you are using an HP authorized battery.

Unit will not turn on. Try one or all of the following:

Reset the unit. Refer to the information on

Resetting the Unit

Chapter 1,

“Getting to Know Your HP iPAQ Mobile Messenger.”

Remove and replace the battery and wait for the unit to power on.

Connect the unit to the AC Adapter connected to an electrical

outlet or to your connected HP iPAQ Cradle to recharge

the battery.

Note:

After you have tried the above solutions and your HP iPAQ still

does not turn on, visit the HP support Web site at

www.hp.com/

support

The backlight keeps

turning off.

In backlight settings, increase the amount of time the backlight stays

on if not in use. From the

Start

menu, tap

Settings > System

tab

Backlight

icon.

Message displays

on the HP iPAQ

screen that the

battery is not

recognized.

In this event, the HP iPAQ uses the remaining power available in the

battery, but the battery will not charge and the device may display a

blinking red LED indicating low battery charge. It is recommended

that you back up information stored on your HP iPAQ and purchase

an HP authorized battery.

Содержание Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB

































































































































































































Результаты поиска

Содержание Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB

Отзывы:

Бренды по названию

Популярные бренды

HP Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB, Руководство пользователя

Результаты поиска

Содержание Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB

Отзывы:

Бренды по названию

Популярные бренды