HP FlexNetwork 5130 HI series, Справочник по командам

Страница: 87 / 306

79
This command might fail to restore the default settings for some commands for reasons such as
command dependencies and system restrictions. Use the
display this command in interface view to
identify these commands, and then use their undo forms or follow the command reference to restore
their default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] default
description
Use description to configure the description of an interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of an interface is interface-name Interface . For example, the default description of
Bridge-Aggregation 1 is Bridge-Aggregation1 Interface .
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
text : Specifies the interface description, a string of 1 to 255 characters.
Examples
# Configure the description as connect to the lab for Layer 2 aggregate interface
Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
display interface
Use display interface to display aggregate interface information.
Syntax
display interface [ bridge-aggregation ] [ brief [ down ] ]
display interface [ bridge-aggregation [ interface-number ] ] [ brief [ description ] ]
Views
Any view