manualshive.com logo in svg

HP EliteDesk 800 G5, Руководство по техническому обслуживанию и ремонту

HP EliteDesk 800 G5 - мощный и надежный компьютер для бизнеса. Перед вами Maintenance And Service Manual, который вы можете скачать бесплатно с manualshive.com. В этом руководстве содержатся инструкции по обслуживанию и ремонту, чтобы гарантировать долгий срок службы вашего устройства.

Поделиться
Скачать
background image

Table 6-3

  Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

SATA Power Management (Enable or Disable)

Enables or disables SATA bus or device power management. Default is Enabled.

PCI Express Power Management (Enable or Disable)

Enabling this option permits the PCI Express links to use Active Power State Management (ASPM) to enter 
lower power states while not in use. Default is Enabled.

Unique Sleep State Blink Rates (Enable or Disable)

This feature is designed to provide a visual indication of what sleep state the system is in. Each sleep 
state has a unique blink pattern. Default is Disabled.

NOTE:

A normal shutdown goes to the S4 state for Windows 10 or later.

S0 (On) = Solid white LED.

S3 (Stand By) = 3 blinks at 1 Hz (50% duty cycle) followed by a pause of 2 seconds (white LED) — repeated 
cycles of 3 blinks and a pause.

S4 (Hibernation) = 4 blinks at 1 Hz (50% duty cycle) followed by a pause of 2 seconds (white LED) — 
repeated cycles of 4 blinks and a pause.

S5 (Soft Off) = LED is off.

Power On from Keyboard Ports (Enable or Disable)

When enabled, this feature allows a key press to power on the system when it is off (S5 state). If using a 
USB keyboard, it must be plugged into one of the rear ports labeled with the keyboard icon. Default is 
Disabled.

Remote Management 
Options

Active Management (AMT) (Intel only) (Enable or Disable). Default is Enabled.

Allows you to discover, repair, and protect networked computing devices.

USB Key Provisioning Support (Enable or Disable). Default is Disabled.

USB Redirection Support (Enable or Disable). Default is Enabled.

USB redirection allows USB devices plugged into a client computer to be transparently redirected to the 
guest operating system.

Unconfigure AMT on next boot (Do Not Apply or Apply). Default is ‘Do Not Apply’.

SOL Terminal Emulation Mode (ANSI or VT100). Default is ANSI.

SOL terminal emulation mode is only activated during remote AMT redirection operations. The emulation 
options allow administrators to select which mode works best with their console.

Show Unconfigure ME Confirmation Prompt (Enable or Disable). Default is Enabled.

Verbose Boot Messages (Enable or Disable). Default is Enabled.

Verbose boot shows additional logging information during the boot. mainly for debugging if something 
goes wrong during bootup.

Watchdog Timer (Enable or Disable). Default is Enabled.

Allows you to set amount of time for a operating system and BIOS watchdog alert to be sent if the timers 
are not deactivated. BIOS watchdog is deactivated by BIOS and would indicate that a halt occurred during 
execution if the alert is sent to the management console. An operating system alert is deactivated by the 
operating system image and would indicate that a hang occurred during its initialization.

●

OS Watchdog Timer (min.) – (5, 10, 15, 20, 25). Default is 5 min.

●

BIOS Watchdog Timer (min.) – (5, 10, 15, 20, 25). Default is 5 min.

CIRA Timeout (min.) (1, 2, 3, 4, Never)

Computer Setup (F10) Utilities 107

Содержание EliteDesk 800 G5
























































































































































Отзывы:

Нет отзывов

Похожие инструкции для EliteDesk 800 G5

T-MAG K6 User Handbook Manual preview
K6
Бренд: T-MAG Страницы: 22
Samsung DP700A3D-A01US User Manual preview
DP700A3D-A01US
Бренд: Samsung Страницы: 145
Layher 3201 Instructions For Assembly And Use preview
3201
Бренд: Layher Страницы: 6
EBN BPC03-B-2930 Service Manual preview
BPC03-B-2930
Бренд: EBN Страницы: 9
Icop D-3362-I Series User Manual preview
D-3362-I Series
Бренд: Icop Страницы: 14
UMAX Technologies U-One 24AL Quick Start Manual preview
U-One 24AL
Бренд: UMAX Technologies Страницы: 34
Zotac ZBOX nano ID61 User Manual preview
ZBOX nano ID61
Бренд: Zotac Страницы: 28
MSI MPC 865 Quick Installation Manual preview
MPC 865
Бренд: MSI Страницы: 123
Simrad MARINE COMPUTER - INSTALLATION REV A Installation Manual preview
MARINE COMPUTER - INSTALLATION REV A
Бренд: Simrad Страницы: 40
thomann Millenium Studio Desk WS20 Assembly Instructions preview
Millenium Studio Desk WS20
Бренд: thomann Страницы: 2
Fujitsu ESPRIMO Q510 Specifications preview
ESPRIMO Q510
Бренд: Fujitsu Страницы: 8
Fujitsu ESPRIMO Q5020 Service Manual preview
ESPRIMO Q5020
Бренд: Fujitsu Страницы: 13
Fujitsu ESPRIMO P910 E85+ Datasheet preview
ESPRIMO P910 E85+
Бренд: Fujitsu Страницы: 10
Fujitsu GP5-HDH84 User Manual preview
GP5-HDH84
Бренд: Fujitsu Страницы: 10
Fujitsu GP5-HDH61 Quick Start Manual preview
GP5-HDH61
Бренд: Fujitsu Страницы: 14
Fujitsu ESPRIMO Q900 Operating Manual preview
ESPRIMO Q900
Бренд: Fujitsu Страницы: 43
Fujitsu ESPRIMO Q9000 Datasheet preview
ESPRIMO Q9000
Бренд: Fujitsu Страницы: 6
Fujitsu FUTRO S900 Datasheet preview
FUTRO S900
Бренд: Fujitsu Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды