HP D2D100, Руководство пользователя

Страница: 52 / 176

Discovery tab
Figure 27 Discovery tab (iSCSI)
Click Add to enter target portals that will enable discovery of the device.
Figure 28 Add target portal
You must enter the IP address or fully quali fi ed domain name of the HP D2D Backup System (for example,
myhpd2d.mydomain.com ) to add it as a target portal for the host on the Discovery tab. Do not change
the Port; it should be 3260.
Targets tab
This tab contains a list of all available devices.
• If this is the fi rst time that the iSCSI Initiator has been con fi gured and the Installation wizard has
not been run, it will automatically create a library with the appropriate number of target devices
(the default is one loader and one tape drive).
• If target devices have already been con fi gured for the host in the past, they appear in the list;
no more are created.
When you run the iSCSI Initiator manually, new devices have a status of Inactive . You must log on to
the appropriate targets for your host. Remember that each library has at least two devices and you
52
Advanced installation