HP D2D100 Скачать руководство пользователя страница 39

Страница: 39 / 176

3 Attaching a physical tape library

or tape drive (optional)

In this chapter:

•

“

Hardware requirements

” on page 39

•

“

Tape device installation overview

” on page 39

•

“

Removing the covers

” on page 40

•

“

Installing the HBA

” on page 40

•

“

Replacing the cover

” on page 43

•

“

Connecting an external or rackmount tape device

” on page 44

Hardware requirements for Tape Attach

A tape storage device may be attached directly to your HP D2D Backup System, allowing you to store

backups offsite.
To use this facility you need:

•

An HP StorageWorks Ultrium tape storage device, such as a tape library or tape drive. This should be

an external device or a 1U or 3U rackmount enclosure for internal devices. The appropriate cables

for the rackmount shelf must be used. Both SAS and SCSI half-height and full-height tape storage

devices are supported.

•

A host bus adapter, HBA, for the tape device connection (because there are no embedded SAS or

SCSI ports). You must purchase and install the HBA before connecting the tape storage device.

NOTE:

Physical tape storage devices attached to the HP D2D Backup System can only be accessed by the HP

D2D Backup System, using the Tape Attach pages. They do not appear as attached network devices to

the host system.

Supported devices

The following tape storage devices are supported:

•

HP 1x8 G2 Autoloader (1 drive, 8 slots, 1 mail slot)

•

HP MSL 2024 Tape Library (2 drives, 24 slots, 1 mail slot)

•

HP MSL 4048 Tape Library (4 drives, 48 slots, 1 mail slot)

•

Library-embedded or standalone HP StorageWorks Ultrium Tape Drives (LTO-2, LTO-3 and LTO-4)

Please refer to

http://www.hp.com/go/connect

http://www.hp.com/go/ebs

for a list of all

supported host bus adapters and tape storage devices. Please refer to “

Using Tape Attach

” on page 121

for more information about transferring data to the storage device.

Tape device installation overview

Before connecting a storage device, you must install an HBA. The instructions in this chapter provide the

following information that is speci

c to the HP D2D Backup System.

D2D Backup System HP D2D2503

Содержание D2D100

















































































































































































Результаты поиска

Содержание D2D100

Отзывы:

Бренды по названию

Популярные бренды

HP D2D100, Руководство пользователя

Результаты поиска

Содержание D2D100

Отзывы:

Бренды по названию

Популярные бренды