When the con
fi
guration page for the device is displayed, DHCP is enabled by default
for IPv4 networks. If you wish to use static IP addressing, disable DHCP and enter the
IP address details.
TIP:
If more than one HP D2D Backup System is being con
fi
gured at the same time, it may be useful
to physically identify a D2D device. Use
Beacon
mode to
fl
ash the LED on the selected device.
For IPv6–only networks you must enter the MAC address of the HP D2D. You will
fi
nd
the MAC address on the label on the top of the unit. The wizard translates the MAC
address into a valid IPv6 address for your network. If it is unable to do this, refer to
“
Using the system console to discover the HP D2D
” on page 47.
•
Create desktop shortcut
to the Web Management Interface.
•
Create base library device on the HP D2D:
If required, this step retrieves and installs the iSCSI initiator, connects this host to the HP D2D
Backup System and con
fi
gures a library. The second option presented in this dialog is
36
Connecting and installing the HP D2D Backup System
Содержание D2D100
