HP D2D100 Скачать руководство пользователя страница 18

Страница: 18 / 176

1. Power supply cable socket

5. PCIe slots (one full and one low pro

le)

2. LAN port 1

6. VGA port for system console monitor

3. LAN port 2

7. PS/2 ports for system console keyboard and mouse

4. Management LAN port (Do

not

connect to this port)

Figure 2 Rear view of the HP D2D Backup System

NOTE:

One full PCIe slot has a SmartArray RAID controller card pre-installed. The other slot is available for

optional Tape Attach.

Optional tape attach

An external or rackmount Ultrium Tape Drive may be attached directly to the HP D2D Backup System,

allowing the user to store backups offsite. Both SAS and SCSI tape drives are supported and require

installation of a host bus adapter (HBA). External tape drives may be half-height or full-height. Rackmount

tape drives are installed in a rackmount enclosure, such as a 1U Rack, 3U Rack or a TapeArray.
To

nd out which Ultrium Tape Drive models and HBAs are supported, refer to

http://www.hp.com/go/connect

http://www.hp.com/go/ebs

Software and hardware requirements

Refer to

http://www.hp.com/go/connect

http://www.hp.com/go/ebs

for the latest connectivity

and compatibility information.

•

The HP D2D Backup System should be connected to a Gigabit Ethernet network. 100 Base-T

Ethernet will limit performance; 10 Base-T Ethernet will severely limit performance.

•

For backup and restore you need software that supports tape autoloaders and libraries. This

software resides on the host, not the HP D2D Backup System. The device may be used with the

major backup applications from HP, Symantec, EMC, Computer Associates and others.

Before you start

Содержание D2D100

















































































































































































Результаты поиска

Содержание D2D100

Отзывы:

Бренды по названию

Популярные бренды

HP D2D100, Руководство пользователя

Результаты поиска

Содержание D2D100

Отзывы:

Бренды по названию

Популярные бренды