HP BL536A, Руководство пользователя и обслуживания

Страница: 71 / 165

2. Press Previous or Next until the screen displays Autoloader Information . Press Enter to select.
By using Previous or Next , you can select from the following information screens:
•
Autoloader Time
•
Firmware rev.
•
Product ID
•
Serial number
•
SCSI ID and LUN (SCSI devices only)
•
Slots and Mailslots
•
Odometer
•
Power On Time
Drive information (Status/Information > Drive Information)
To obtain drive information:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information .
Press Enter to select.
2. Press Previous or Next until the screen displays Drive Information . Press Enter to select.
3. By using Previous or Next , you can select from the following information screens:
•
Serial number
•
Drive type
•
Firmware revision
•
SCSI ID (parallel SCSI tape drives only)
Component status (Status/Information > Component Status)
To obtain component status:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information .
Press Enter to select.
2. Press Previous or Next until the screen displays Component Status . Press Enter to select.
3. By using Previous or Next , you can select from the following information screens:
•
Drive activity
•
Autoloader status
•
Drive status
•
Fan status
The second line of the screen will display one of the following:
•
Good — the component is operating normally.
•
Warning — the component might have an issue that should be addressed. The device is
functional.
•
Critical — the component has an error condition that should be addressed. The device
may not be fully functional.
•
Failed — the component has a known failure and should be replaced.
Network information (Status/Information > Network Information)
To access network settings for the device:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information .
Press Enter to select.
Operator control panel (OCP) 71