HP BL536A, Руководство пользователя и обслуживания

Страница: 58 / 165

•
SNMP: disabled, but saved addresses do not change
•
E-mail notification: disabled, but configurations retained
The following settings are not reset:
•
Administrator password
•
Network settings (network is always enabled and the network addresses are retained)
•
Date and time
To save the device configuration to a file, click Save and follow the instructions on the RMI to
specify a file location.
To restore the device configuration from a file, browse to the location of the saved configuration
file and click
Restore .
The configuration settings that are saved to file are:
•
Administrator password
•
Mailslot configuration
•
All network settings, including DHCP, DNS, IPv4 and IPv6 addresses
•
Barcode reader label length and barcode reader alignment
•
Reserved slots
•
Autoloader mode
•
All drive configuration settings
•
Auto clean
•
SNMP addresses and configurations
•
Log tracing configuration
•
Email notification configuration (SMTP address, email address, filter level)
•
Option to allow the magazine access without the administrator password
•
Option to ignore the barcode media ID
•
Encryption and security settings
Operations
Moving media
Use the Operations: Move Media page to move tape cartridges within the device.
IMPORTANT: Moving media manually can interfere with backup software operations. Ensure
backups are complete before moving media.
58 Operating the Tape Autoloader