HP A1710n - Pavilion - 1 GB RAM, Руководство по началу работы

Страница: 45 / 194

Connecting Speakers or Microphone
35
To connect digital audio speakers:
1 Turn off the computer.
2 Connect the Digital Out connector on the back panel of your computer to the digital
input (S/PDIF) on digital speakers or a digital audio system.
3 Turn on the computer.
4 Plug in the speaker system power.
5 Turn on the speaker system.
6 After the speakers are connected to the computer, configure the audio software for
sound output for your computer model. See “Configuring Speaker and Sound
Options.”
Audio card with digital output and type 3 connectors: See “Configuring Audio
Output with Multichannel Sound Manager.” Follow the instructions to enable
digital audio output.
Audio card with digital output and type 6 connectors: See “Configuring Audio
Output with Sound Effect Manager.” Digital audio output is already enabled as
the default.
Sound card: See “Configuring Audio Output with a Sound Card.” Follow the
instructions to enable digital audio output.
NOTE:
Type 3 is three connectors.
Type 6 is six connectors.
Type S is sound card.
NOTE: Always turn on the computer before you turn on the speaker system.
3
6
S