manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 78 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 78

Channel Measurements

Making Channel Measurements

5. Return to the full-field display by pressing Prev Menu

 To stop all measurement activity, press STOP 

At this point, the analog display mode can be activated by pressing

ON OFF in the 

 menu. The sweep time can then be

adjusted and the knob used to control the dot density to obtain the desired
display. In addition, the display line and display line delta functions may

be used for measuring depth of modulation. Press DISP LINE ON . Use

the knob to place the display line on top of the horizontal sync pulses
located at the top of the display. The delta display line can be activated by
pressing More   of 2 , DL DELTA ON OFF .

The delta display line is then positioned at the minimum (white) level.
Then the depth of modulation is displayed in the active function area. For
further information about the delta display line, refer to the DL DELTA
function description in Chapter 5.

When finished, turn ON OFF OFF.

Press the mode key twice 

 

 to return to the cable TV menu.

You cannot re-start the depth of modulation measurement after pressing 

STOP 

 

You must

press 

MAIN MENU, 

then 

DEPTH MOD 

to re-start the measurement.

7. If you want to store the results to a RAM card, insert a formatted RAM

card into the analyzer’s card-insertion slot, press 

 

 ,

then press 

 (MODE) to return to channel measurement mode. Refer

to Chapter 3 for the procedure on formatting a RAM card.

8. If you want to print the results, press 

 To stop the test, press MAIN MENU.

2 - 3 5

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов