manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 274 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 274

Test Descriptions

Composite Triple Beat 

 Test Description

When 

 is pressed the analyzer measures the total power at the

input, the level of the channel to be 

 and the analyzer noise floor.

Based on this information it decides what the analyzer attenuator should
be set to. In addition it alerts you when it thinks additional attention is
needed. This is indicated by the presence of message (See MORE INFO) in
the lower right hand corner of the screen. This message occurs when the
cable noise floor is within 3 

 or the analyzer noise floor. It is intended to

alert the operator that the analyzer signal-near-noise correction is kicking in.
In addition, the message is presented in inverse video when the cable noise
floor is within 2.2 

 of the analyzer noise. This indicates the analyzer is

correcting the result by more than 3 

 and the measurement uncertainty of

the result is rising. It is intended that you raise the input level and preselect
if necessary.

8-21

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов