manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 144 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 144

Formatting a RAM Card

1. Check that the switch on the RAM card to be formatted is set so the card

is not write protected.

2. Insert the RAM card into the analyzer with the card’s arrow matching the

raised arrow on the bezel around the card-insertion slot.

3. Press 

 MORE   of 3 , Card  Conf 

 

 Press FORMAT CARD , FORMAT CARD This formats the RAM card.

5. If SYSTEM is still displayed in the upper-right corner of the analyzer

display, you can press 

 (MODE) to return to the current cable TV

measurements menu.

Before you use the RAM card for the first time, you must format the RAM
card. Once the RAM card has been formatted, the test plan and test data can
be saved on it.

Figure 3-18. A RAM Card

3-37

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов