manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 247 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 247

TV Receiver, Setup, and AUX CTRL Menu Maps and 

 Descriptions

 Descriptions

 

 

 

Allows you to turn the TV sound on and off. This feature is the same as the

TV 

 mode of operation except that it is accessed from a front-panel

Press 

 Monitor TV to access SOUND ON OFF .

See Also 

“Step 5. Access the TV receiver mode” in Chapter 2.

 

Allows you to select the standard (STD) channel tuning configuration.

If you do not select a channel configuration, the default configuration is
the standard (STD) configuration. The choices for the channel tuning
configuration are: standard (STD), off-the-air (AIR), incrementally related
carriers (IRC), harmonically related carriers (HRC), and T format.

The analyzer retains the channel tuning configuration selection, even when
power is turned off, until a new selection is made.

Press CABLE TV ANALYZER , Setup, Channel Tuning to access STD

See Also 

“Step 1. Configure the test system” in Chapter 2.

7-16

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов