HP 8591C Скачать руководство пользователя страница 238

Страница: 238 / 373

TV Receiver, Setup, and AUX CTRL Menu Maps and

Descriptions

Descriptions

Allows you to select an external pad, an external

and measure

total power at the input to the analyzer. An external 50 to 75 pad is used
for analyzers with 50 input impedances. The EXT PAD YES

function

compensates for amplitude loss caused by an external pad.

An external preamplifier (or the internal preamplifier in HP 8591C analyzer)
is used for the carrier-to-noise test.

The external pad and

settings are stored in non-volatile analyzer

memory. This means that the analyzer retains the selection, even when
power is turned off, until a new selection is made.

The

PWR INPUT measures the total input power and displays the

result on the screen.

Press

TV ANALYZER,

Setup to access Analyzer Input

See Also

“Step 1.

the test system” in Chapter 2.

Содержание 8591C






















































































































































































































































































































































































Результаты поиска

Содержание 8591C

Отзывы:

HP 8591C, Руководство пользователя, Страница: 238 / 373

Результаты поиска

Содержание 8591C

Отзывы: