HP 8591C, Руководство пользователя, Страница: 122 / 373

System Measurements
Making System Measurements
If you want the data printed, press DUMP to PRINTER . For
information about connecting the printer to the analyzer, see “Step 3.
Install a printer,” located in Chapter 1.
c. If you want the data to be saved on a RAM card, insert a RAM card in
the card reader, ensure that the RAM card has been formatted and the
write-protect switch is set so the RAM card is not write protected, then
press DUMP TO RAM CARD
See “Formatting a RAM Card” later in this chapter for information
about formatting a RAM card.
23, 1993
T O S C R E E N T e s t n o w r e s u l t s
t o
T O P R I N T E R T e s t n o w w i t h r e s u l t s
s e n t t o p r i n t e r
T O C A R D T e s t n o w w i t h
s t o r e d C a r d
M a i n M e n u
R e t u r n t o M a i n
DUMP TO
SCREEN
DUMP TO
P R I N T E R
DUMP TO
C A R D
Figure 3-8. Dump Options Menu
If you want to stop the testing, press ABORT . It takes a few seconds for
the testing to stop after ABORT is pressed.
After measurements are completed, the following screen is displayed.
3-15