manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 250 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 250

I

TV Receiver, Setup, and AUX CTRL Menu Maps and 

 Descriptions

 Descriptions

 

Allows you to select the T channel tuning configuration. As an alternative to
making this selection, enter T channel numbers, 7 to 13, as negative numbers
when any of the 4 other 

 are selected. If you do not select a

channel tuning conEguration, the default configuration is the standard (STD)
configuration. The choices for the channel tuning configuration are: standard
(STD), off-the-air (AIR), incrementally related carriers (IRC), harmonically
related carriers (HRC), and T (upstream) format.

The channel tuning configuration selection is selected independently of the
test plan and is not stored with the test plan. The analyzer retains the
channel tuning configuration selection, even when power is turned off, until a
new selection is made.

Press CABLE TV ANALYZER, Setup , Channel Tuning to access T

See Also 

“Step 1. 

 the test system” in Chapter 3.

7-19

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов