manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 237 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 237

 Descriptions

This section contains the descriptions of the TV RECEIVER, 

 and

Setup 

 functions. The functions are listed alphabetically according to

the 

 labels.

 

Allows you to select the AIR tune configuration. The AIR is also called
off-the-air or over-the air tune configuration. It refers to signals that are
broadcast over the air and received with an antenna. The AIR frequency
assignments are defined in the Federal Communications Commission’s (FCC)
channel identification plan, part 76.612.

If you do not select a tune 

 the default tune 

 is

the standard (STD) configuration. The choices for the tune configuration
are: standard (STD), off-the-air (AIR), incrementally related carriers (IRC),
harmonically related carriers (HRC), and T format.

The analyzer retains the tune 

 selection, even when power is

turned off, until a new selection is made.

Press CABLE TV ANALYZER, Setup, Channel Tuning to access AIR.

See Also

“Step 1. 

 the test system” in Chapter 2.

7-6

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов