manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 244 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 244

I

TV Receiver, Setup, and AUX CTRL Menu Maps and 

 Descriptions

 Descriptions

 

Allows you to select the incrementally related carriers (IRC) channel tuning

If you do not select a channel tuning configuration, the default configuration
is the standard (STD) configuration. The choices for the channel tuning
configuration are: standard (STD), off-the-air (AIR), incrementally related
carriers (IRC), harmonically related carriers (HRC), and T format.

The analyzer retains the channel tuning configuration selection, even when
power is turned off, until a new selection is made.

Press CABLE TV ANALYZER , Setup , Channel Tuning to access IRC .

See Also

“Step 1. Configure the test system” in Chapter 2.

 

 

Allows you to access the TV receiver mode. This feature is the same as the

TV RECEIVER mode of operation except that it is accessed from a front-panel

Press 

 to access Monitor TV

See Also

“Step 5. Access the TV receiver mode” in Chapter 2.

7 - 1 3

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов