manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 177 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 177

Channel Measurements Menu Map and 

 Descriptions

Channel Measurements 

 Function Descriptions

Procedure

 

 

 

 

Description

The display line delta function displays the change, in percent, between
a reference display line and the display line activated by pressing

DL DELTA ON OFF The percentage is displayed in the active function block.

1. Set up the desired measurement.

2. Press 

 then DSP LINE ON OFF to activate the display line to be

used as the reference.

3. Use the knob to position the display line.

 Press More 1 of 2 , then DL DELTA ON OFF to activate the display line

delta function.

5. Position the display line delta using the knob.

6. Read the percent change in the active function block.

Figure 5-7 shows the reference display line at the top of the signal and the
display line delta at the bottom of the signal. The measurement shown was
performed in display mode.

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов