manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 151 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 151

I

If You Have a Problem

Error Messages

 

 

 

 

 

 

 

This message can be caused by the following:

q 

A test plan was not saved in the test plan number that you are trying to

recall.

l 

If you are not sure of the test plan number, catalog the trace registers

of analyzer memory as described in “Cataloging Analyzer Memory” in
Chapter 3. The catalog listing will show if a test plan has been saved in
the trace register.

q 

A trace has been stored in the trace register for the test plan, overwriting

the test plan. (Remember that the test plans are stored in trace registers 6
through 10.)

l 

If a trace has been saved in the trace register for the test plan, you will

need to reenter the test plan.

 

 

 

 

This message indicates that testing did not begin before the stop time
occurred.

To solve this problem:

l 

Reenter the start date and time and the stop date and time.

4-4

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов