manualshive.com logo in svg

HP 8591C, Руководство пользователя, Страница: 182 / 373

Поделиться
Скачать
HP 8591C Скачать руководство пользователя страница 182

Channel Measurements Menu Map and 

 Descriptions

Channel Measurements 

 Function Descriptions

 

 

 

The gating function allows you to make carrier-to-noise and composite second
order (CSO) distortion measurements without turning off modulation (Option

107 required).

The following procedure assumes that the GATING YES NO function in the

Setup menu is set to NO. For more information about GATING YES NO ,

refer to “Step 1. 

 the test system” in Chapter 2.

Procedure

1. Select the required channel using the CHANNEL SELECT 

 The

 automatically tunes to the selected channel.

2. After selecting the desired measurement, press GATE ON OFF to

underline ON.

3. The analyzer automatically searches for a quiet line.

 the analyzer Ends a quiet line, and if PAUSE YES NO in the Setup

menu is set to NO, the measurement is executed.   the analyzer 

 a

quiet line, and if PAUSE YES NO in the Setup menu is set to YES, you

must then press CONTINUE to execute the measurement.

4. If a quiet line cannot be found automatically, perform the following steps:

a. Press LINE SEARCH to perform an auto search, or press

SELECT LINE , enter a line number using the data keys, then press

 Press FLD BOTH EVEN ODD if you want to change the Eeld.

 Press CONTINUE to complete the measurement and display the test

result on the screen.

5 - 1 7

Содержание 8591C






















































































































































































































































































































































































Отзывы:

Нет отзывов