HP 70340A, Руководство пользователя

Страница: 270 / 445

MEMory:T ABLe:SELect
MEMory:TABLe:SELect FDAT tableno
The \MEMory:T ABLe:SELect" command selects the lev el correct table where lev el correct
data will b e loaded.
The parameter is as follows:
tableno The n um b er of the lev el correct table where lev el correct data will b e loaded.
The n um b er m ust b e an in teger from 1 to 4.
This command selects one of four lev el correct tables where lev el correct data will b e loaded
using the \MEMory:T ABLe:FREQuency" and \MEMory:T ABLe:LOSS[:MA GNitude]"
commands.
If a table n um b er en try is made that is not within the allo w able range, the lev el correct table
en try is rejected and no action is taken b y the Signal Generator. The table is preset at the
factory to 1. Pressing the 4 INSTR PRESET 5 ( 4 I-P 5) k ey has no eect on this command.
Note
The \MEMory:T ABLe:SELect" command is used to select a table for data
loading only . The \[SOURce[1]:]CORRection:CSET[:SELect]" command is
used to select the lev el correct table that is used to correct p o w er at the Signal
Generator RF OUTPUT connector.
Query Syntax
MEMory:TABLe:SELect?
Returned format:
FDA T tableno <NL>
Where:
tableno ::= The lev el correct table curren tly selected to b e loaded with lev el correct data.
See Also
MEMory:T ABLe:FREQuency
MEMory:T ABLe:LOSS[:MA GNitude]
[SOURce[1]:]CORRection:CSET[:SELect]
T o Use the Lev el Correct Routine
7-46 Programming Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com