HP 70340A, Руководство пользователя

Страница: 282 / 445

DISPla y[:WINDow][:ST A T e]
DISPlay
2
:WINDow
32
:STATe
3
ON
OFF
The \DISPlay[:WINDo w][:ST A T e]" command turns the display screen on and o.
The parameters are as follows:
ON T urns the display screen on.
OFF T urns the display screen o.
The display state is stored in the instrumen t state registers along with other instrumen t state
data, so if sensitive instrumen t settings are stored to a register, the settings are not rev ealed
when the register is recalled. The preset condition for the \DISPlay[:WINDo w][:ST A T e]"
command is ON.
Note
Once the display has b een turned o, cycling the LINE switch o and then on
will not restore the display .
Query Syntax
DISPlay
2
:WINDow
32
:STATe
3
?
Returned format:
state <NL>
Where:
state ::= \+1" if the display screen is curren tly turned on.
state ::= \+0" if the display screen is curren tly turned o.
ABORt
ABORt
The \ABOR t" command resets the trigger system and places all trigger sequences in the idle
state.
Note
This command is pro vided for SCPI compatability only . In this v ersion of
the Signal Generator, the trigger system is alwa ys con tinuously initiated.
When the \ABOR t" command is receiv ed, the trigger system en ters but then
immediately exits the idle state.
See Also
INITiate:CONTinuous
7-58 Programming Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com